How to Reset Canon MP237 Printer

Ink errors cause absorption
Canon printers use small pads that form sponges to absorb the ink dump that accumulates when printing and scanning cartridge heads. When the sponge pads are full, the printer will notify you an error message such as P07 or E08 "Printer error" or "Full ink sprayer".

Suspend the operating system that makes the user need a resetter to solve problems that occur in Canon MP237. Lack of experience usually leaves the owner confused about how to solve this problem. Especially for beginners who still have to understand many ways to solve the error problem on Canon MP237. Therefore as a Canon MP237 selector printer you need to know how to reset my way so as not to fail. This is also suitable to reset the .

Steps to reset the Canon MP237 printer

Step 1: Create the printer in service mode
Before resetting, the first step to do is to make the printer printer in service mode. With service mode status then operation will run smoothly. Here are the easy steps in service mode: Turn off the printer by pressing the power button if the printer status is on. Press STOP / RESET when printer status is off. Then press the power button simultaneously with the Stop / Reset button. Press the Stop / Reset button and press the power button. The position of the power button is still depressed, you also have to offset by pressing off / reset up to 6 times then simultaneously release with the power button. If you correctly do the above to reset the MP237 stage, your computer will detect the new hardware if the service mode process succeeds. Conversely, if the operation fails, the detection will not appear.

Step 2: Reset the Canon MP237 Printer
Find and get the download resetter tools
Start with the Canon MP237 Driver and software resetter commands
Extract and run MP237 Resetter by double-clicking URv3400.exe utility tool
SubTabClearInkCounterclickMain
SubTabInkAbsorberCounterclickmain
Click the PrePing PaperPrinterWellstart paper sheet.

Turn off the printer and run again, if the operation is successful then the printer resetter will return to "work".

For 2018 there will a total of ten events in the Series. Seven of these events will be classed as ‘Short’ of which you must complete four. Then there are the three remaining ‘Long’ events of which one must be completed.